6-Point Subframe Brace Install  
Rivet may need to be hammered in. The inserts will "rivet" themself in. Alternately  you can enlarge the hole carefully with the proper drill but this is not needed. Use the longer hex bolt and nut as a tool screw the bolt/nut/washer combination into the rivet and hold the bolt while tightening the   nut. This will "rivet" it in place. Then remove the tool.

Rivet may need to be hammered in. The inserts will "rivet" themself in. Alternately you can enlarge the hole carefully with the proper drill but this is not needed.

Use the longer hex bolt and nut as a tool screw the bolt/nut/washer combination into the rivet and hold the bolt while tightening the nut. This will "rivet" it in place. Then remove the tool.

Upload date : Mon Jan 31 16:57:50 2005
Capture date : Mon Jan 31 16:57:50 2005

Powered by Gallery v1 RSS