$164.69

Performance Brake Line Kit NG900 94-98 9-3 99-02
[40005]

Performance Brake Line Kit NG900 94-98 9-3 99-02

Add to Cart

Date Added: Friday 25 July, 2008

by M. Luke Wisniewski

After doing the front install, I thought others would benefit from my mistakes. I installed the kit on a MY95 900.

Tools Needed:
Flat Blade screwdriver
11,14,17mm Socket
Jack and Jack Stands
Drain Pan
10mm Flare (Brake Line) Wrench
Channel Locks
7mm Allen (Hex) wrench
19,24mm Open-End Wrench
Torque Wrench

Jack up front of vehicle and secure with jack stands.

Remove center cap and wheel/tire assembly (Flat blade and 17mm).

Place drain pan under caliper.

Remove banjo (from brake line to caliper) bolt, try to find the brass washers on both sides of the bolt (11mm socket).

Disconnect the solid brake line from flexible house, the 10mm little nut on top of the mounting tab not the 17mm on the bottom of the mounting tab. The 17mm can be used to hold the line in place if need be, I did not need to. (10mm flare wrench).

Remove clip securing the flexible line to the mounting point, slide the line out of the mounting point (channel locks).

Install new brake line to caliper, the fitting should be angled away from the caliper. Make sure to put a new brass washer on each side of the banjo bolt. Also, make sure the brake line does not interfere with accessing the caliper guide pin. (14mm socket, torque wrench, 7mm allen wrench).

Install new line into mounting point, hold bottom with 19mm wrench and tighten bolt with 24mm wrench (19,24mm wrench).

Install solid brake line into fitting on end of SS line (10mm flare wrench).

Bleed Brakes.

Re-install wheel/tire and lower vehicle.

I will write instructions for the rear lines as a separate review.

Rating: 5 of 5 Stars! [5 of 5 Stars!]

Write Review Back
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Shifter Mount Kit Cobalt/ HHR
2 x Midpipe 2.0T 07-11 FWD (2wd)
1 x Oil Filter Re-locator
1 x Moog Ball Joint
1 x v6oilcoolplate
2 x Replacement V6 Coolant Cap
1 x MTF0063 Manual Gear oil
1 x ATF Saab 3309 (Automatic 02->)
1 x K&N Filter Service Kit
1 x T7 Head Plug NGK
3 x Con Rods V6 2.8L 155.8mm
1 x BSR 9-5 2010-2011 V6 300Hp
1 x 9-5 Exhaust Flex Pipe Stainless
2 x 9-5 Aero Sill Protection
2 x Saab black Keychain
3 x Shift Rod Bushings
1 x SCNA Christmas Calendar
3 x ARP Exhaust Manifold Stud kit Stainless
1 x Sport Transmission Mount 9-3/900 (Automatic)
1 x Open Air Intake 9000 93-98
1 x Cat Back Exh for 9000 CS, CSE AERO
1 x Alu Hybrid Flywheel For NG900/9-3
2 x Shifter Top Ghost Logo
1 x 9000 High Performance Brake Line Kit '95-'98
1 x Fog light 9-3 left 99-00
1 x Limit Strap Coilover Add On Kit
1 x Mass Airflow Meter T7
1 x Turbo Conversion Pipe 900 9-3 T5
1 x Fog light Replacement Panels
1 x Exhaust Clamp Kit
1 x Rear Engine Mount 4cyl
1 x Crush Sleeve F35 F25
1 x BSR 9-5 3.0T V6 200Hp
2 x BSR Optiflow Intake 4cyl w SAI
1 x Midpipe 2.8T XWD (4wd)
1 x Weld Bungs -Taper- Race Only
1 x Headbolts (New Style)
1 x BSR PPC 9-3 SS/SC Aero 2.8T V6 250hp
1 x 4340 Connecting Rods B204 B235
1 x 9-5 Wheel 10-Spoke 16in.
1 x AEM Wideband Gauge Kit
2 x Short Shifter HHR Cobalt F35 F40
2 x 3pt Subframe Brace for 9-3 SS 2003-> 2wd
1 x 9-3 / 900 Uprated Suspension Bushings Inner
1 x Downpipe 2.8T FWD (2wd)
1 x Injectors 175hp Stg3 (Set4)
1 x 5d Rear Window repair kit 94-02 900/9-3/9-5
2 x Front Camber Adjustment Bolts
2 x Downpipe 2.8T XWD (4wd)
1 x BSR Optiflow Intake V6 2.8t
1 x B207 Coolant Cap
1 x Forge Turbo Bypass Valve 9-3SS 2.0T 210hp
1 x V6 Tank Float - SparePart
1 x Torque Mount Insert V6 Manual (XWD and FWD)
1 x BSR Optiflow Replacement Filter V6 2.8
1 x BSR Optiflow Intake 4cyl
3 x 4 Cyl 2.0 Coolant Tank
1 x Brake Vac pump seals
1 x Coreganizer
1 x Sparkplugs 9-3SS
1 x Headlight Connector Repair Kit 9-3SS 9-5
1 x InjectorDynamics 725cc For 2.8V6 (Set6)
1 x ShortShift Kit 93ss
1 x Midpipe 2.8T FWD (2wd)
1 x Cat Back Exh Dual Exit for 9-3 SS/SC 2.8t
1 x Metal Steering Wheel Buttons
1 x Ignition Coil 9-3SS 2.8t and 2.8T
1 x Adaptor Harness Handsfree 01-
1 x Forge Bypass Valve Cobalt/HHR TC
1 x Cat Back Exh for 9-3 SS 03-06, CV04-06 Stainless
1 x 9-3 / 900 Uprated Front ARB Bushings
1 x Shifter Mount Kit 93ss
1 x Oil Cap GM "HHR"
1 x Forge Turbo Bypass Valve 9-3SS 2.0t 175hp
1 x Ignition Coil 9-3SS 2.0t and 2.0T
1 x Rear Pedestal Spoiler 9-3 SS
1 x 20th Viggen logo Shifter Top
1 x Floormats BSR 9-3SS/SC
1 x Hood Emblem 9-3 SS/sc 03- All
1 x 3 Point Hardware
1 x IAT Weld Bung T5/Bosch
2 x ARP Ring Gear Bolts F25/F35
1 x Viggen Clutch Kit 99-02
$18,882.40
Manufacturer Info
Goodridge
Other products
Share Product
Share via E-Mail