$164.69

Performance Brake Line Kit NG900 94-98 9-3 99-02
[40005]

Performance Brake Line Kit NG900 94-98 9-3 99-02

Add to Cart

Date Added: Friday 25 July, 2008

by M. Luke Wisniewski

Here's the rear line instruction. This is more of a pain than the front mainly because space is tight. I did this on a M95 900.

Tools Needed:
Jack and Jack Stands
Drain pan
17mm Open-End Wrench
10,13mm Flare (Brake Line) Wrench
13,17mm Socket
Channel Locks
Torque Wrench

Jack up rear of vehicle and secure with jack stands.

Remove center cap and wheel/tire assembly (flat blade screwdriver and 17mm socket

Place drain pan under control arm, the brake fluid will leak on to the control arm and run down to its lowest point.

Disconnect the solid brake line from the caliper to the flexible line at the bracket on the control arm (10mm flare wrench).

Remove bracket that holds flexible brake line to control arm (13mm socket).

Remove clip securing flexible brake line to bracket (channel locks).

Remove solid brake line from brake limit valve (a cylinder just upstream from the flexible brake line)(13mm flare wrench).

Remove brake limit valve (17mm wrench).

Remove clip holding flexible brake line to mounting point (channel locks).

Install SS line into mounting bracket, secure with clip.

Reinstall brake limit valve (17mm wrench).

Reinstall solid brake line to brake limit valve (13mm flare wrench).

Install other end of SS line into bracket (19,24mm wrench).

Install bracket onto control arm (13mm socket).

Install solid brake line from caliper to SS line (10mm flare wrench).

Bleed brakes

Reinstall wheel/tire assembly (17mm socket, torque wrench).

Remove jack stands and lower vehicle.

Rating: 5 of 5 Stars! [5 of 5 Stars!]

Write Review Back
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
7 x T7 3.5 Bar Fuel Pressure Regulator
6 x T7 Injector Spacer Kit
5 x Viggen Fog Air Intake
3 x 9-3 Rear Ashtray
4 x Ignition Coil 9-3SS 2.8t and 2.8T
1 x 9-3/NG900 Shift Knobs Leather
2 x Moog Ball Joint
3 x 20th Viggen logo Shifter Top
4 x Oil Cooler Adaptor B2X5
1 x 9000 Shifter Bushing Repair Kit
2 x B207 Coolant Cap
1 x Troll Head Plug
1 x T7 Head Plug NGK
1 x Con Rods V6 2.8L 155.8mm
1 x SCNA Christmas Calendar
1 x BSR Optiflow Intake V6 2.8t
1 x BSR Optiflow Intake Volvo S60 I T5 2001-2004
3 x BSR 9-5 260Hp 2006-
2 x BSR 9-5 3.0T V6 200Hp
4 x Catback 2.5in Exh 900/9-3 94-02 Round Tip
1 x BSR 9-5 2010-2011 V6 300Hp
3 x 5d Rear Window repair kit 94-02 900/9-3/9-5
2 x 9-3 / 900 Uprated Front ARB Bushings
3 x 9-3 / 900 Uprated Suspension Bushings Inner
2 x 3pt Subframe Brace for 9-3 SS 2003-> 2wd
3 x BSR Optiflow Intake 4cyl w SAI
3 x Open Air Intake 9-3 00-02 and Viggen (All T7)
2 x BSR 9-5 Aero 250Hp 2004-2005 Stage E85
1 x Steering Rod Bushings NG900/93
1 x Machined Control Arm Kit
1 x Basic Subframe Brace
1 x Throttle Bend for T5 94-99
2 x Antenna Plug NG900/9-3 hatchback
1 x Air Filter 06 version (All 9-5)
3 x 9-5 Aero Sill Protection
1 x Downpipe Flange Assy. Stainless T25/Td04 to 3in
1 x Injectors Siemens 60lb 630cc (set 4)
2 x Shifter Top Ghost Logo
2 x Direct Ignition T7 Black
2 x Flex Pipe 900 94-98 9-3 99-02
5 x PPC - Upgrade from stage 1 to stage 3
1 x MTF0063 Manual Gear oil
2 x Turbo Conversion Pipe 900 9-3 T5
1 x JE Piston Ring (1cyl) 90.5mm 235/205/204
3 x 9-3 99-02,03 CV Antenna Adaptor
1 x AEM Wideband Gauge Kit
3 x Downpipe Hardware Kit
2 x 9-5 Open Air Prefilter
2 x 9-3 SS Akebono Rear Pads
2 x Filter 9-5 Cabin Air
3 x Sport Transmission Mount 9-5 (Manual) 1998-1999
1 x Floormats BSR 9-5
3 x Slave Cyl
1 x Rivetnuts Pair (2pcs)
1 x 9-5 Textile Mats 98-07
1 x Front Camber Adjustment Bolts
1 x Midpipe 2.8T FWD (2wd)
1 x Torque Mount Insert V6 Manual (XWD and FWD)
1 x Optical Cable Connector (Onstar Delete)
1 x ShortShift Kit 93ss
2 x Adaptor Harness Handsfree 01-
1 x Injectors 175hp Stg3 (Set4)
1 x BSR PPC 9-3 SS/SC 2.0T 210hp XWD 09-
2 x Rear Pedestal Spoiler 9-3 SS
2 x BSR PPC 9-3 SS/SC Aero 2.8T V6 250hp
3 x Forge Turbo Bypass Valve 9-3SS 2.0t 175hp
3 x Short Shifter NG900/9-3 94-02/9-5 (Outright Kit)
1 x 9000 Intercooler ETS
1 x Transmission Nut F35 F25
1 x Brembo Brake Kit 315mm 9-3 SS
1 x Crush Sleeve F35 F25
3 x Forge Turbo Bypass Valve 9-3SS 2.0T 210hp
1 x BSR PPC 9-3 SS/SC 2.0T 210hp 2007-->
1 x BSR PPC 9-3 SS/SC TurboX and XWD 2.8T V6 280hp
1 x Midpipe 2.8T XWD (4wd)
1 x Mass Airflow Meter T7
2 x Custom Brake Lines RR 300mm Kit
4 x BBS Center Cap for 9-2x RK small caps
1 x Hood Emblem 9-5 All
1 x Aero Clutch Kit 9-5
1 x Fog light 9-5 Aero 04-05, 06-08 All Right
1 x Performance Brake Line Kit NG900 94-98 9-3 99-02
1 x Oil Pressure Switch
1 x Viggen Front Brake Disk Pair 308mm
1 x Bulb Switch Light
1 x Clear Little Fender Blinkers Factory Saab
2 x Front Brake Pads 9-5 9-3 900 LOW DUST
1 x Cabin Vent Fan
1 x BSR Optiflow Replacement Filter V6 2.8
1 x Brake Vac pump seals
1 x Fuel Pressure Regulator 4.0 bar
1 x 9-3 ng900 radio wires
1 x Replacement V6 Coolant Cap
1 x Ignition Coil 9-3SS 2.0t and 2.0T
1 x Goodridge Brake Lines 9-3 SS / SC 03-
1 x Steering Coupler 9-3 99-02
1 x Fog light Replacement Panels 99-01
1 x BSR Optiflow Intake 4cyl
1 x Forge Bypass Valve Cobalt/HHR TC
3 x Hawk HPS FRONT Pads 9-3 9-5 (900 97-98)
1 x ARP Exhaust Manifold Stud kit Stainless
2 x 9-3, 9-5 Front Brake Rotor / Disk (Code: AD)
1 x V6 Tank Float - SparePart
1 x Rear Rotors PAIR 278mm Plain (Code: BA)
1 x Rear Brake Pads 9-3 SS
1 x Hawk HPS FRONT Pads 9-3 TurboX (345mm)
1 x Brembo Kit 315mm Hawk HPS Pads
1 x Ceramic Low Dust Brake Pads 9-3 SS
1 x Custom Brake Lines Brembo 315mm 9-3SS/SC
1 x Rear Rotors PAIR 292mm Plain (Code: BB)
1 x Shifter Mount Kit 93ss
2 x Shifter Alignment Pins (Set 2)
2 x Cat Back Exh for 9-5 Aero 04-, All 06-
2 x 9-3 900 9-5 REAR Brembo Disk See Descr.
1 x 9-5 AERO 308mm Front Brake Rotor / Disk
2 x Rear Brake Pads 900 97-98, 9-3 99-02+ 03CV
1 x Shift Rod Bushings
1 x 9-5 Wheel 10-Spoke 16in.
1 x Exhaust manifold Stud Kit
1 x 9-5 Intercooler ETS
1 x Drop in Sport Filter 9-5
$34,598.62
Manufacturer Info
Goodridge
Other products
Share Product
Share via E-Mail